TEKTON Gripping Pliers Set with Bent Nose, Long Nose (3-Piece)

Long, Slender Nose: Relative to their overall length, the 7 in. pliers have an extra-long and slender nose that reaches deep into tight spaces and offers a deft grasp on small parts. Thick Jaws with Fine Tips: Tapering to a fine tip just at the nose, the jaws of the 8 in. pliers are thick and wide at the base so they won’t roll over each other or separate when you are aggressively pulling or twisting. 70° Bent Nose: The 6 in. pliers have a smooth, 70° bend to work around obstructions. Originating from a point more than halfway down the jaw, the bent section is exceptionally long, offering generous reach. Crosscut Teeth: Oriented at 120° to each other 60° to each side of the jaw centerline the serrations are cut in 2 passes to form regularly-spaced, diamond-shaped teeth. Unlike single serrations that are cut straight across the jaw, this pattern creates uniform contact across the jaw surface, allowing you to grasp, pull, and twist evenly in any direction.

• Thin, lightweight 7 in. (straight) and 6 in. (bent) pliers have an extra-long, slender nose that reaches deep into tight spaces and grasps small parts
• Strong, stout 8 in. pliers have thick jaws that taper to a fine tip just at the nose to prevent twisting
• Crosscut teeth distribute force evenly for sure grip in any direction
• Side cutter with induction-hardened blades (HRC 58-64) on the 7 in. and 8 in. pliers cleanly snips copper, aluminum, and other soft metal wire
• Slim, nonslip grips provide comfort and control without adding bulk
• 2-piece long nose pliers: 7 in., 8 in.
• 1-piece bent long nose pliers: 6 in.